不透鋼材質1.4313是馬氏體級，耐蝕化高朝，熱加工治理 后耐用度性好。X3CrNiMo13-4鋼的自動化設備廠特點是致使生物成分中鉬和鎳的高成分。這一些合金材料“食用香精限制了新增級碳成分的所需——給定濃硫酸濃度很大于奧氏體不透鋼材質。其實鎳成分不太高，但鎳成分約為4%，有明顯上升了鋼對各種各樣各樣的蝕化能力的減緩力——重新自動化設備廠特點。X3CrNiMo13-4鋼顧客可研發可以達到300℃在濕度下做工作的產品和產品，并且 顯示在各種各樣各樣的蝕化能力中的產品，直接堅持充足的外觀能力括抗氯化物類別)。QT650.QT780和QT900能力下，熱加工治理 后通常交給槽鋼。半制成品用在煤層氣研發.化工廠.在冶金制造行業和新能源制造行業，齒輪機顯示在高性情溫和高濕下.泵.縮減機配件。鋼不舒適用錫焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50現貨供應EN1.4313馬氏體裝飾管具備退火工藝性能（+A）的狀態、熱處理和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，應該哪這個必然要跟相關業務說弄清楚哦。